Redline Plus XDI-F1 CD-IR Carbon Dioxide (0-2% in Air)

The Red Line sensor uses proven non-dispersive single beam dual-wave length infrared principles to detect and monitor the presence of gases. This non-poisoning sensing technique relies on the target gas having a unique well-defined absorption signature. This is used to identify the presence of the target gas and is highly specific. Using a suitable infrared source, an analysis of the optical absorption through the gas allows the concentration of the target gas to be determined. All sensor driving is internal to the transmitter and full fault monitoring of the sensor and transmitter is continuous.

Specifications

Certification
Explosion proof ATEX-IECEx
II 2G Exd IIC T6-T3 Gb
II 2D Extb IIIC T85-C Db
Power Supply - 15 to 30vDC 24v Nominal
Outputs - 3 wire analog 4~20mA / 4 wire CANbus
Relays Low alarm S.P.C.O
High alarm S.P.C.O
Fault alarm S.P.C.O / overrange
Rating - 0.5A @30vDC
Inhibit option during servicing
Logging - Intervals - One minute to one hour / Storage - 2,880 readings
Display - 2 line alpha numeric back lit status display: gas type, concentration, units, alarm levels, alarm status (low/high/over range), sensor ID, Inhibit
Indicators
Alarm - Red LED / Fault - Amber LED - (Flashing when in inhibit)
Housing Material - Copper free aluminium alloy, optional stainless steel
Finish - Chemical resistant epoxy paint - RAL 9003 Signal White / Optional - Marine grade finish
Ingress Protection - IP64 + water shield IP65
Cable Entry - 2 x M20 - 1.5 pitch - alternatives 25mm - 3/4 NPT
Weight - 1.6kg
Temperature -15?C to +55?C
Humidity - 0 to 99% RH non-condensing