You are here: Fixed Gas Components : Gas Devices : For use in Safe Areas
Add to Favourites ?

Click to add this product to your favourites list in your My Account panel. To access your list, log in to your account and select Favourites. To access your account at any time, click on the Welcome Back button at the top of any web page.
30J-F1-CA Flammable Sensor CAT300A (Catalytic 2v / 300mA LEL) 1 - 64 Addressable

    Case Studies

    "The support from Shawcity staff during my request was valuable and helped make the process effortless. Overall your customer service is superb, very fast, friendly and helpful."

    Gary Smith, Undergraduate Industrial Placement Student, E.ON UK

    Share this product Print page

    Product Code: 171-211

    30J-F1-CA Flammable Sensor CAT300A (Catalytic 2v / 300mA LEL) 1 - 64 Addressable

    All Gas Types Available

    The 30J enclosure has been designed to allow quick and easy access to its interior by adjustment of two allen screws, this factor is a major consideration when large system service and calibrations are being carried out. The detector is robust and weather-proof with improved response times due to the four mounting spacers allowing increased air movement around the detector these spacers also improve the mounting of the unit particularly on circular pillars typically found in carparks. S tandard 4~20mA signalling with CAN bus address enables the sensors to be networked via the GDS Combi control system or customer preferred monitoring system.

    Flexible output options
    Addressable or stand alone
    Hyper terminal communications rs232 line data and set up with 232 adapter
    Data logging
    Optional alarm relays
    Robust and weather-proof

    Specifications

    Power Supply - 15 to 30vDC 24v nominal
    Outputs
    3 wire - 4~20mA
    4 wire - CAN bus
    Relays (optional)
    Low alarm S .P.C.O
    High alarm S .P.C.O
    Fault alarm S .P.C.O / over range
    Rating 0.5A @30vDC
    Inhibit option during servicing
    Logging
    Addressable sensors only
    Intervals - one minute to one hour
    Storage - 2,880 readings
    Temperature:-150C to 550C
    Humidity:00C to 99% RH - non condensing

    DETECTOR HEAD
    Type - F1 Hazardous area use
    Data Sheet - Ref C105
    Certification
    ATEX / IECEX
    Ingress Protection
    IP63, + Universal fitting IP64
    Material - Stainless Steel 316 S16
    Weight - 166gms
    Dimensions - Length 32mm, Dia 33mm
    Sensor Inserts - 4 series
    Electrochemical
    Infra-red
    Semiconductor
    Pellistor-catalytic
    PID

    Accessories - Optional
    Collector Cone + Universal Fitting
    Universal Fitting (test gas applicator/spray deflector)
    Water Shield - stainless steel
    Flow Block - nylatron
    Flow Block - stainless steel
    Duct Mount Kit
    Detector Head Weather Shield
    F1 Sensor Thermal Jacket

    JUNCTION BOX
    Type - 30J S afe area use only
    Deep box (D) Shallow Box (S)
    Ingress Protection - IP64
    Material - ABS Flame retardent FR 40 / Lid Screws M4SS
    Finish - Signal White RAL 9003
    Dimensions - 147 W x 145 H x 99 D mm
    Weight - 380gms
    Entries
    Rear: 5-20mm knock outs
    Bottom: 2x drill targets
    Top and Sides: Not specified
    Mounting
    Standoffs - M4 or N o 8 screws
    Drill at (C) when standoffs removed
    Conduit box - drill at (A) 4.5mm
    Surface mount box - drill at (B) 4.5mm
    EU Design No. - 01359723-0001

    Downloads

    Select a variation from the product list

    Buy for: £303.15 (ex VAT)
    Buy for: £363.78 (inc VAT)
     

    Shawcity offer technical support on all products.
    For more information call 01367 899553.

    Register for a Shawcity account

    • Manage your quotations and track order progress
    • Store your contact and delivery information for easy check-out
    • Use the ‘Add to favourites’ feature to make reordering simple.
    Register your details ›

    SIGN UP TO OUR NEWSLETTER

    If you sign up to receive our newsletter, Shawcity will only use your name and email address for the purpose of sending you news and product updates via email. Your data will be kept indefinitely for this purpose but we will never sell or share your details with any other party. If you change your mind you can stop receiving our communications at any time, by clicking on 'Unsubscribe' within our emails or by contacting: marketing@shawcity.co.uk.

    Thank you, you will receive a confirmation email shortly.

    Captcha Image

    By submitting this form, you are consenting to our privacy policy.

    ATEX is the name commonly given to the two European Directives for controlling explosive atmospheres.

    ATEX certification ensures that equipment is fit for use within explosive atmospheres and is supplied with adequate information to ensure it can be used safely.

    For more information visit: hse.gov.uk/fireandexplosion/atex.htm

    © 2018 Shawcity Ltd
    Ts&Cs Sales | Ts&Cs Hire | Privacy and Cookies | Brexit | COVID-19
    Web Support and Development by Wysi

    © 2018 Shawcity Ltd

    Ts&Cs Sales | Privacy and Cookies

    Web Support and Development by Wysi