Case Studies

"Shawcity have provided good, reliable and efficient service and calibration for us over a number of years at a reasonable price. Their processes are simple and straightforward and turnaround is quick."

Oliver Stretton-Downes, Briar Chemicals Ltd

Share this product Print page

Product Code: 171-700

30J-P1-CA Hydrogen Fluoride (0-10 ppm) - EC (1-64 Input Addressable)

All Gas Types Available

The 30J enclosure has been designed to allow quick and easy access to its interior by adjustment of two allen screws, this factor is a major consideration when large system service and calibrations are being carried out. The detector is robust and weather-proof with improved response times due to the four mounting spacers allowing increased air movement around the detector these spacers also improve the mounting of the unit particularly on circular pillars typically found in car-parks. Standard 4~20mA signalling with CANbus address enables the sensors to be networked via the GDS Combi control system or customer preferred monitoring system.
- Flexible output options
- Addressable or stand alone
- Hyper terminal communications rs232 line data and set up with 232 adapter
- Data logging
- Optional alarm relays
- Robust and weather-proof


Power Supply - 15 to 30vDC 24v nominal
Outputs - 3 wire - 4~20mA
4 wire - CAN bus
Relays (optional)
Low alarm S.P.C.O
High alarm S.P.C.O
Fault alarm S.P.C.O / overrange
Rating 0.5A @30vDC
Inhibit option during servicing
Logging - Addressable sensors only / Intervals - one minute to one hour / Storage - 2,880 readings
Temperature-150C to 550C
Humidity-00C to 99% RH - non condensing

DETECTOR HEAD - Type - P 1 Safe area use
Ingress Protection - IP63, + Universal fitting IP65
Material - ABS - black
Sensor Inserts - 4 series
Infra Red
Pellistor - Catalytic

Accessories - Optional
Collector Cone + Universal Fitting
Universal Fitting (test gas applicator/spray deflector)
Flow Block
Duct Mount Kit
Detector Head Weather Shield

Type - 30J Safe area use only
Deep box (D) Shallow Box (S)
Ingress Protection - IP64
Material - ABS Flame retardent FR 40 / Lid Screws M4SS
Finish - Signal White RAL 9003
Weight - 380gms
Entries - Rear 5-20mm knock outs / Sides, Top, Bottom - not specified
Standoffs - M4 or N o 8 screws
Drill at (C) when standoffs removed
Conduit box - drill at (A) 4.5mm
Surface mount box - drill at (B) 4.5mm
EU Design No. - 01359723-0001


Select a variation from the product list

Buy for: £649.29 (ex VAT)
Buy for: £779.15 (inc VAT)

Shawcity offer technical support on all products.
For more information call 01367 899553.

Register for a Shawcity account

  • Manage your quotations and track order progress
  • Store your contact and delivery information for easy check-out
  • Use the ‘Add to favourites’ feature to make reordering simple.


If you sign up to receive our newsletter, Shawcity will only use your name and email address for the purpose of sending you news and product updates via email. Your data will be kept indefinitely for this purpose but we will never sell or share your details with any other party. If you change your mind you can stop receiving our communications at any time, by clicking on 'Unsubscribe' within our emails or by contacting:

ATEX is the name commonly given to the two European Directives for controlling explosive atmospheres.

ATEX certification ensures that equipment is fit for use within explosive atmospheres and is supplied with adequate information to ensure it can be used safely.

For more information visit: